Assembling the Rear Tray
Follow below steps to attach the Rear Tray to the scanner for holding the
paper as it exits from the ADF.
1. Locate the Rear Tray Slots on the lower back of the scanner.
2. Insert the Rear Tray tabs into the slots on the scanner.
3. Flip open the extension on the Rear Tray.
Installing Software
Please complete the software installation before connecting the scanner.
NOTE: Do not connect USB Cable to the scanner or your computer when
starting installation process.
Installing the Scanner Driver
The scanner comes with the scanner driver that is packaged with
TWAIN / WIA driver, Hotkey Utility and the iDocScan D20 program. You
can either scan from any TWAIN-compatible applications by selecting
a TWAIN or WIA user interface, or you can use the Hotkey Utility for
Hotkey scanning, or you may also use the iDocScan D20 program for
scanning as your preference.
1. Insert the Installation CD into your CD-
or DVD-ROM drive. The installation menu
will open automatically.
NOTE: If the installation menu does not
open automatically, double click on the
CD- or DVD-ROM icon in the "Computer"
or "Windows Explorer", then click on the
AUTORUN.exe icon.
2. In the main menu, select "Scanner Driver".
3. Click "Next" when the Welcome screen
is displayed, then follow on-screen
instructions to complete installation.
4. Click "Finish" when the installation is
complete.
5. Remove the Installation CD from your computer.
INSTALLATION
7