Operating Instructions - kozy heat CSK-29-G Installation And Operation Manual

11.0 OPERATING INSTRUCTIONS

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage,
personal injury, or loss of life.
A. This appliance is equipped with an ignition device which
automatically lights the pilot. Do not try to light the pilot by
hand.
B. BEFORE OPERATING smell around the appliance area for
gas. Be sure to smell next to the floor because some gas is
heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone
in your building.
• Immediately call your gas supplier from a neighbor's
Do not operate appliance with the glass front removed, cracked,
or broken. Replacement of the glass should be done by a licensed
or qualified service person.
Under no circumstances should any solid fuel (wood, coal, paper,
cardboard, etc.) be used in this appliance.
Children and adults should be alerted to the hazards of high
surface temperature and should stay away to avoid burns or
clothing ignition.
1. STOP! Read all the safety information above on this page.
2. Press the wireless remote OFF button.
3. Turn off all electric power to the appliance.
4. This appliance is equipped with an ignition device which
automatically lights the pilot. Do not try to light the pilot by
hand.
5. Locate the manual valve installed by your qualified service
technician.
6. Turn the manual valve clockwise
7. Wait five (5) minutes to clear out any gas. Then, smell
for gas, including near the floor. If you smell gas, STOP!
Follow 'B' in the safety information above. If you do not smell
gas, go to the next step.
8. Turn the manual valve counterclockwise
position.
1. Press the wireless remote OFF button.
2. Turn off all electric power to the appliance if service is to
be performed.
When this fireplace is initially lit, condensation will appear on the glass. This is normal in all gas fireplaces and will disappear after
several minutes. A paint smell will occur during the first few hours of burning. It is recommended to leave the fan off during this period to
help speed the paint curing process. This fireplace may produce noises of varying degree as it heats and cools due to metal expansion
and contraction. This is normal, and does not affect the performance or longevity of the fireplace.
24 OPERATING INSTRUCTIONS
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING
OPERATING INSTRUCTIONS
to the OFF position.
to the ON
TO TURN OFF GAS TO APPLIANCE
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
C. Use only your hand to turn the gas control manual valve.
Never use tools. If the valve will not turn by hand, do not
try to repair it; call a qualified service technician. Force or
attempted repair may result in a fire or explosion.
D. Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the
appliance and to replace any part of the control system and
any gas control that has been under water.
Clothing or other flammable material should not be placed on or
near the appliance.
Young children should be carefully supervised when they are in the
same room as the appliance. Toddlers, young children and others
may be susceptible to accidental contact burns. A physical barrier
is recommended if there are at risk individuals in the house. To
restrict access to a fireplace or stove, install an adjustable safety
gate to keep toddler, young children and other at risk individuals
out of the room and away from hot surfaces.
9. Turn on all electric power to the appliance.
10. Press the wireless remote ON button.
11. If the appliance will not operate, follow the instructions, "To
Turn Off Gas To Appliance" and call your service technician
or gas supplier.
ON/OFF
3. Locate the manual valve installed by your qualified service
technician.
4. Turn the manual valve clockwise
NOTE
CAUTION
OFF
ON
to OFF position.