If you find excessive play on brake lever or pedal and brake
pads are still in good condition, contact your Ducati Dealer or
authorised Service Centre to have the system inspected and
any air drained out of the circuit.
Brake and clutch fluid can damage paintwork and
plastic parts, so avoid contact.
Hydraulic oil is corrosive; it may cause damage and lead to
Never mix fluids of different qualities.
Check that the seals are in good condition.
Checking brake pads for wear
Check brake pads wear through the inspection hole in the
callipers. Change both pads if friction material thickness of
even just one pad is about 1 mm.
Friction material wear beyond this limit would lead to
metal support contact with the brake disc thus
compromising braking efficiency, disc integrity and rider
Have the brake pads replaced at a Ducati Dealer or
authorised Service Centre.