The CODE CARD (fig. 32) supplied with the keys reports an
electronic code (A, fig. 33) to start the engine in the event it
fails to start after KEY-ON because the immobilizer system
inhibited the ignition.
Keep the CODE CARD in a safe place. However, it is
advisable to keep the electronic code printed on the CODE
CARD handy when you ride your motorcycle, in case it is
necessary to enable the engine through the procedure
described below. This procedure lets you disable the
"engine block" function - indicated by the amber yellow
"Engine Diagnosis EOBD" light (8, fig. 4) coming on - in the
event of problems with the immobilizer system.
This operation is only possible if the electronic code indicated
on the code card is known.
Your dealer will ask you to produce the Code Card in
order to re-program or replace a key.