Replacing The Print Roller And Rewind Assist Roller - CAB a2+ Operating Instructions Manual

A2+/A4+/A6+/A8+
Cleaning and basic maintenance
8.8

Replacing the print roller and rewind assist roller

Fig. 19: Removing the side plate
10
9
Fig. 20: Removing and installing rollers
Edition 5/06
4
6
3c
5
Operating Instructions
Removing the side plate
1. Turn lever (1) counterclockwise to lift the
printhead.
2. Lift the pinch roller (5) off the rewind assist
roller.
3. Remove labels and transfer ribbon from
the printer.
4. Loosen screws (4) on plate (6) with hexag-
onal wrench by several turns and remove
plate (6).
5. Unscrew screws (3abc) of the side plate
3a
(2) with hexagonal wrench.
3b
6. Remove side plate (2).
2
Removing and installing rollers
1. Pull print roller (7) and rewind assist roller
(8) from the shafts (9, 10) on the housing.
2. Clean shafts (9, 10) of the rollers (see
expanded view at shaft (10)).
3. Slide print roller (7) and rewind assist roller
(8) onto their respective shafts and turn
1
slightly until the hexagon of the shaft
engages in the hexagon socket of the print
roller.
4. Set side plate (Item 2, Fig. 19) in place and
screw it down with the screws (Items 3abc,
7
Fig. 19) by tightening the screws in order,
i.e. a, b then c.
5. Set plate (Item 6, Fig. 19) in place and
tighten screws (Item 4, Fig. 19) with hex-
8
agonal wrench.
31