Cross References And References To Graphics, Tables And Documents - CAB a2+ Operating Instructions Manual

A2+/A4+/A6+/A8+
Notes on the documentation
DANGER!
Risk of death via electric shock!
Before opening the housing cover, disconnect the device from the mains supply and wait
a few minutes until the power supply unit has discharged.
1.2.2 Notes
Important information is identified with an exclamation mark on the left-hand side of the page.
Information is identified with an "i" on the left-hand side of the page.
1.2.3 Display texts on the printer screen
All texts appearing on the printer screen are identified in a special way e.g.: Timezone > UTC+1. This
abbreviated statement instructs the user to select the Timezone menu and then the UTC+1 option in
this menu.
1.3

Cross references and references to graphics, tables and documents

1.3.1 Item numbers
Item numbers in the text are identified with parentheses, e.g. (9). If no figure number is provided, item
numbers in the text always refer to the graphic directly above the text. If a reference is made to another
graphic, the figure number is specified, e.g. Fig. 5 (1).
1.3.2 Cross references to chapters and sections
With a cross reference to chapters and sections, the chapter number and page number are specified,
e.g. a reference to this section: (see "1.3.2" on page 6).
1.3.3 References to other documents
References to other documents have the following form: See "Configuration Instructions". All documents
referred to in these instructions are listed in the section entitled "Structure of the documentation and nav-
igation". (see "1.1" on page 5).
6 Operating Instructions Edition 5/06