Upgrade The Firmware And Reboot The Intercom; Uploading The Firmware - CyberData 011214 Operation Manual

2.5 Upgrade the Firmware and Reboot the Intercom

2.5.1 Uploading the Firmware

To upload the firmware from your computer:
1. Retrieve the latest Intercom firmware file from the VoIP Outdoor Intercom with Keypad
2. Unzip the firmware version file. This file may contain the following:
•
•
3. Log in to the Intercom home page as instructed in
Operations Guide
Caution
Equipment Hazard: Devices with a serial number that begins with 2141xxxxx can
only run firmware versions 10.0.0 or later.
GENERAL ALERT
Downloads page at:
http://www.cyberdata.net/products/voip/digitalanalog/intercomkeypadv3/downloads.html
Firmware file
Release notes
Home Page".
Installing the VoIP Outdoor Intercom with Keypad
Section 2.4.4, "Log in to the Configuration
930809M
Intercom Setup
CyberData Corporation
83