Default Settting And Erasing; Programming Termination - Brave Smyle - C User Manual

5.8 Default settting and erasing

Parametr Value
8#
This setting doesnt change parametres 1 and 2 (numbers saved in memories)
Parametr Value
81
82
83
84
85
86
87
80
Parametres 81 and 82 makes erasing of all numbers saved in button memories.
Parametres 83 – 87,80 makes default settings for parametres starts 3,4,5,6,7,0
only. Default settings values are mentioned at every parametr in right - column
"Default".
CAUTION !!! the erasing is unreturnable !!! it is neccessary programm again

5.9 Programming termination

Parametr Value
9
After 9 dial in programming tone the door intercom hangs up.
BRAVE – user guide
Description
#
Default
Description
Erase all numbers in group 1
Erase all numbers in group 2
Default settings for parametres 3x only
Default settings for parametres 4x only
Default settings for parametres 5x only
Default settings for parametres 6x only
Default settings for parametres 7x only
Default settings for parametres 0x only
Description
(Day mode)
(Night mode)
E N D of programming
Default
execute
Default
3 only..
4 only..
5 only..
6 only..
7 only..
0 only..
Default
47