Brave Smyle - C User Manual page 41

Parametr Value
6*
In default is switch off t=0. By activation this feature t=1 is processor going to
„sleep mode" after line connection and after 3sec the door intercom makes
initialization. It delays line picks up after line ( voltage) connection – activation
status / PBX restart. When this feature is not efficient and PBX still evaluate the
line into „failure" mode" then you have to use external power supply – put DIP
switch 3 and 4 to position "on" – possible at version /C (C) only. It is the same
like using Best Box option.
BRAVE – user guide
Description
delay start for PBx´s with line testing
t
(Siemens)
Default
0
(0/1)
41