Brave Smyle - C User Manual page 35

Parametr Value
45
46
dd – command to switch into DAY mode [2 digits] /
nn – command to switch into NIGHT mode [2 digits] /
1
/ - command has always 2 digits but if you want use 1 digit then you have
possibility insert " *a " where a is just one number which switch DAY/NIGHT
mode (star represents empty character and must be on first position).
Note. Switching into DAY or NIGHT mode stays setup even after power (line)
disconnection from door intercom
Parametr Value
47
e – dial numbers mode e=0 dial numbers from first and second group, e=1
numbers are dialled up DAY/NIGHT mode in door intercom
CAUTION !! setting of this parametr has a big influence to numbers dialling
Parametr Value
4*
k – line hanging up by push of same button:
k=0 feature is switch off
k=1 again button push hang up the line
CAUTION !! setting of this parametr has a big influence to numbers dialling
BRAVE – user guide
Description
Command to switch into DAY mode
dd
(00-99,*0-*9)
Command to switch into NIGHT mode
nn
(0099,*0-*9)
Description
e
Door intercom dial mode
Description
Feature of line hanging up by again push of
k
the same button
1
1
(0/1)
(0/1)
Default
11
10
Default
1
Default
1
35