Person Inside Building; Outgoing Call - Brave Smyle - C User Manual

mode m = 4
Action
Button push
Mode m = 6
Action
Button push
Poznámka: t1 – time activation 1 of relay (parametr 371)
Tab. 1 Table of relay(s) control

3.3 Person inside building

By person inside building we mean person in telephone connection with
Brave intercom , for example Mr. Scott.

3.3.1 Outgoing call

Outgoing call is a call from door intercom (generated by visitor). After door
intercom dial is ringing a phone inside the building. When you pick up the phone
you can talk to visitor. By code dialling you can activate the relay (parametr 35) -
when relay is setup in mode m=1 or m=5. You also can switch operation mode
DAY/NIGHT (parametr 45,46) and hang up (parametr 43). Door intercom sends
10sec before call ending (parametr 52) alerting tone and you can prolong the
call by dialling special character from phone (parametr 42). By phone hanging
up the call is ended (PBX generates busy tone into the line which is detected
and door intercom hangs up). There is one more option which is hang up the
line by again push of the same button (parametr 4*).
24
Note
Any button different from
Button setup by 311* or
Note
Any button different from
Button setup by 311* or
t2 – time between pulses 1 of relay (parametr 301)
t3 – time between activation 1 and 2 relay (parametr 39)
t4 – time activation 2 of relay (parametr 372)
t5 – time between pulses 1 of relay (parametr 302)
311* or 312*
312*
311* or 312*
312*
Parametr Relay
3114
3124
3114
3124
Parametr Relay
3116
3126
3116
3126
BRAVE – user guide
-
-