Default Setting - Roland VersaCamm SP-540i User Manual

4-4 Optimizing Printing or Cutting to Match Media Thickness

Press to go back to the original screen.
W1200mm
SETUP SHEET
Description
The movement distance of the media changes subtly depending on the media's thickness. This means that the length of a
line when cut may differ from the length setting in the data. You enter a correction value when you want to align the lengths
of cut lines precisely.
However, when you're performing printing followed by cutting, be sure to set the correction value to "0.00%. " Otherwise the
printing and cutting positions may become misaligned.

Default Setting

[FEED SETTING]: 0.00%
[SCAN SETTING]: 0.00%
77