Checking The Timing Belt And Sprockets - Yamaha F100C Service Manual

NOTE:
Do not turn the camshaft when loosening the
driven sprocket bolt.
Flywheel holder: 90890-06522
6. Remove the nut 1, drive sprocket A,
retaining plate B, and Woodruff key C.
Checking the timing belt and
sprockets
1. Check the interior and exterior of the tim-
ing belt for cracks, damage, or wear.
Replace if necessary.
60C5D11
2. Check the drive sprocket 1 and driven
sprockets 2 for cracks, damage, or
wear. Replace if necessary.
Installing the sprockets and timing
belt
1. Check that " " marks a and b on the
driven sprockets 1 are aligned, and then
tighten the bolts 2.
2. Install the retaining plate 3, Woodruff
key 4, drive sprocket 5, and nut 6, and
S60C5200
then tighten the nut.
Timing belt and sprockets
E
1
2
S60C5220
3
4
5
6
S60C5230
7
8
9
5-18