3. Install the O-rings 6 into the shaft 7.
4. Install the gasket 8 and cover 2, and
then tighten the cover screws to the
specified torque.
A A
Oil pump cover screw:
4 N·m (0.4 kgf·m, 2.9 ft·lb)
Disassembling the oil pan
1. Remove the muffler 1 and plate 2 from
the oil pan 3.
2. Remove the exhaust manifold 4 from
the oil pan 3.
3. Remove the oil pan 3 from the exhaust
guide 5.
4. Remove the oil strainer 6.
60C5D11
A
E
E
S60C7070
Upper case (F100C)
Checking the oil strainer
1. Check the oil strainer for dirt and residue.
Clean if necessary.
Assembling the oil pan
1. Install the gaskets onto the exhaust
guide 1.
2. Install the oil strainer 2 and bolts, and
then tighten the bolts to the specified
torque.
Oil strainer bolt:
11 N·m (1.1 kgf·m, 8.0 ft·lb)
1
2
3
S60C7205
4
5
6
7
8
S60C7080
9
7-60