Yamaha F100C Service Manual page 199

M M
Mounting bolt:
39 N·m (3.9 kgf·m, 28 ft·lb)
4. Install the trim tab 2 to its original posi-
tion, and then connect the speedometer
hose 3.
60C5D11
Drive shaft and lower case (F100C)
5. Install the propeller and propeller nut,
LT
572
S60C6585
Do not hold the propeller with your hands
when loosening or tightening it. Be sure
LT
to remove the battery leads from the bat-
572
teries and the engine shut-off switch. Put
a block of wood between the anti-cavita-
tion plate and propeller to keep the pro-
peller from turning.
NOTE:
If the grooves in the propeller nut 4 do not
align with the cotter pin hole, tighten the nut
until they are aligned.
S60C6590
and then tighten the nut finger tight.
Place a block of wood between the anti-
cavitation plate and propeller to keep the
propeller from turning, and then tighten
the nut to the specified torque.
WARNING
Propeller nut 4:
34 N·m (3.4 kgf·m, 25 ft·lb)
1
2
3
4
5
6
7
8
9
6-52