Chapter 1, Introduction
Phone Features
•
A 3.5" x 2.25" backlit display.
•
6 programmable state-based softkeys supporting up to 20 programmable functions.
•
4 line/call appearance keys with corresponding status lamps.
•
Supports up to 9 lines.
•
Full-duplex speaker for handsfree calls.
•
Headset support (modular connector).
•
Inline power support.
•
Built-in two-port, 10/100 Ethernet switch allowing you to share a connection with
your computer.
General Requirements
The 35i IP Phone requires the following environment:
•
A SIP-based IP PBX system or network installed and running with a SIP account
created for the 35i.
•
Access to a Trivial File Transfer Protocol (TFTP) server.
•
Ethernet/Fast Ethernet LAN (10/100mb).
•
Category 5/5e straight through cabling.
•
Power Options:
–
–
–
M
2
M
Power over Ethernet (PoE) 802.3af.
Inline power injector – An optional accessory necessary only if your network
provides no inline power.
AC power adapter, included with the phone.
Aastra – 2742-002