Ptz Pattern - FLIR M3200 SERIES Instruction Manual

19 Using FLIR Cloud™ Client for PC or Mac
5. Use the chart to select which presets you would like to include in the tour and the order
of presets.
• Preset: Select the preset number.
• Time(s): Enter the time in seconds the camera will remain on the selected preset.
• Operation: Click
the tour.
6. Click OK to save changes.
To run a PTZ tour:
1. Select the tour number and click

19.3.3 PTZ Pattern

Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the Advanced controls. Select Pattern.
2. Select the number of the pattern you would like to set up.
3. Move the camera into the desired start position.
4. Click to start recording the pattern.
5. Move the camera to the desired end position. Then, click
pattern.
To run a pattern:
1. Select the pattern number and click
#LX400051; r. 1.0/23100/23101; en-US
to add a preset to the tour. Click
.
.
to delete a preset from
to stop recording the
87