Configuring The Video Recording Schedule; Configuring Pre-Recording - FLIR M3200 SERIES Instruction Manual

17 Using the Main Menu

17.3.14 Configuring the Video Recording Schedule

You can set a custom recording schedule according to your needs. For example, you can
set the system to record continuously during business hours and record on motion detec-
tion only outside of business hours.
A custom recording schedule helps reduce the amount of hard drive space required, in-
creasing the time your system can retain recordings.
To configure the video recording schedule:
1. From the Main Menu, click
2. Under Channel, select the channel you would like to configure or select All.
3. Configure the schedule as needed:
• Check Continuous, MD (motion detection), Alarm, or Alarm & MD to select the re-
cording type you would like to configure.
• Click and drag on each day to customize the recording schedule. The schedule is
set up as a grid, which each block representing one hour.
• Click next to All to link the recording schedules for all days. The icon for a day
changes to when days are linked. You can also click the boxes next to individ-
ual days to link them to each other. If the recording schedule is linked, changes
made to one of the days will apply to every day that is linked.
• Click to disable all recording of the selected type on the selected day.
• Click if you need to set a more precise schedule down to the minute.
4. Click OK to save changes.

17.3.15 Configuring Pre-Recording

The system can pre-record video when motion detection events occur.
#LX400051; r. 1.0/23100/23101; en-US
and then click Storage>Schedule>Record.
63