Test; Bps; Log - FLIR M3200 SERIES Instruction Manual

17 Using the Main Menu

17.2.7 Test

The Test menu allows you to test if your system can connect to other devices over the LAN
or Internet. You can enter the IP address of a device and click Test to determine if your
system can connect to it.
To access Test:
• From the Main Menu, click

17.2.8 BPS

The BPS sub-menu shows the bitrates of connected cameras. The bitrate is the amount of
data the camera is sending to the system.
To access BPS:
• From the Main Menu, click

17.2.9 Log

The Log sub-menu allows you to search for system logs.
#LX400051; r. 1.0/23100/23101; en-US
and then select Network>Test.
and then select BPS.
51