Activating the repeater before a call
A repeater-access tone is sent to activate the repeater before
a call is made, so that the start of the call is not lost. To send
a repeater-access tone, you may be able to either:
■
■
Sending a repeater-access tone using the
PTT key
1
2
Sending a repeater-access tone using a
function key
1
2
64 Operating in conventional mode
use the PTT key, or
use a programmed function key.
Press the PTT key and the repeater-access tone for the
current channel is sent.
The call details appear in the display, the red LED glows
and
appears in the display. You may also hear
signalling tones.
Press and hold the PTT and proceed with your call.
Press the function key programmed for sending a
repeater-access tone, and the repeater-access tone for
the current channel is sent.
The call details appear in the display, the red LED glows
and
appears in the display. You may also hear
signalling tones.
Press and hold the PTT and proceed with your call.