3
4
Changing the background scan group assigned
to a function key
You can change the background scan group assigned to the
function key programmed for group scanning or for scan-
ning/nuisance delete.
1
2
72 Operating in conventional mode
If standard scan is active and there has been no recent
activity on the channel (the amber LED is glowing rather
than flashing), then the channel that is called depends on
the way your radio has been programmed. The possible
options are:
— your radio calls a predetermined channel e.g.
your dispatcher,
— your radio calls the channel where activity was
last detected, or
— your radio calls the last free channel.
When the called party responds, proceed with
your conversation.
Select Menu>Advanced>Set
scan key.
In the Set Scan Key menu, scroll
through the list of background
scan groups until the group you
want appears.
Advanced
Set scan key
Program groups
Back
Set scan key
Group1
Group2
Back
Select
Select