Tait TM8250 Operator's Manual page 33

wait until other users have finished before using the
■
radio. The radio may be in use if the red transmit LED is
glowing, there is audio from the speaker, or there is user-
related activity (such as scrolling) on the display.
you can change the display contrast and the volume with-
■
out impacting on other users.
features such as backlighting and indicator volume apply
■
to all control heads. Consider other users before changing
these features of the user interface.
Listening to outgoing transmissions
Your radio may be programmed so you can hear outgoing
transmissions initiated from other control heads. You may
need to remove the microphone from the microphone clip to
hear these transmissions.
Identifying your control head type
Some actions apply to the primary control head only, such as
adjusting the volume of a remote speaker.
To check whether your control head
is the primary or secondary head:
1 Select Menu>Radio settings>
Radio info>Multi head info.
2 Press Select to view the control
head type.
In the example shown, the
control head is the primary head.
Radio info
Key settings2
Multi head info
Back
Head status:
primary
Back
Getting started 33
Select