Re-Establishing A Call - Tait TM8250 Operator's Manual

Transmit timer
Your radio may have a transmit timer that limits the amount
of time you can transmit continuously.
When the transmit timer is about to
expire, the message Transmit
timeout imminent appears in the
display, the red LED flashes and the
radio gives three beeps.
If the transmit timer times out, the call clears down.
Call time limit
In MPT trunked mode, the length of your call may be limited
by the network or by your radio. Your radio may be
programmed to display the time remaining for your call.
When your call time is about to
expire, the message Call timeout
appears in the display, the red LED
flashes and the radio gives a
repeated beep.

Re-establishing a call

The last number recall, unanswered call and callback func-
tions allow you to re-establish calls using the PTT key.
Last number recall
When an outgoing call has ended, the message Last call to
and the called unit's identity may appear on the display.
To make a call to that person again, briefly press the PTT key.
Unanswered call
When an incoming call is missed, the message
Missed call and the caller's identity may appear in
the display.
To return the call, briefly press the PTT key.
Operating in MPT trunked mode 105