Tait TM8250 Operator's Manual page 78

The following messages may appear when using nuisance
delete to temporarily delete a channel from a group, when
adding or deleting channels from a group, or changing a
group's transmit or priority channels.
Message
Scanning not on You cannot use nuisance delete to temporarily delete a
No channel
captured
Not enough
channels in
group
Cannot delete
channel
Cannot delete
priority chan
Only two chan-
nels in group
No items
in list
Group full
78 Operating in conventional mode
Meaning
channel from a group, as there is no group currently
selected.
You cannot use nuisance delete to temporarily delete a
channel from the group, as there is no channel
currently captured (the amber LED is glowing and not
flashing).
You cannot use nuisance delete to temporarily delete
the channel from the group, as the captured channel is
the last remaining group member.
You cannot use nuisance delete to temporarily delete
the channel from the group. The captured channel may
be the selected channel in a background scan group.
You cannot use nuisance delete to temporarily delete
the channel from the group, as the captured channel is
a priority channel.
You cannot delete a channel from the group, as there
would be only one group member left.
The action you are attempting is not allowed. Either:
the group does not have a preset transmit channel
■
or priority channels programmed, or
you have added all the channels in the zone to the
■
current group.
You cannot add any more channels to the group, as
the maximum number of members (50) has been
reached.