Turning On/Off The Power; Turning On The Main Power - Toshiba E-studio 1105 Operating Instructions Manual

2. Getting Started

Turning On/Off the Power

This section discusses how to turn on/off the power.
Power connection
Confirm how much power the options draw, and then plug them into an outlet that is nearby but
2
separate from the outlet that the main machine is plugged into.
Power supply
This machine has two power switches: operation switch and main power switch.
• Operation switch (right side of the control panel)
Press to activate the machine. When the machine has finished warming up, you can make use
of each function.
• Main power switch (inside the front left cover)
Turning off this switch makes the main power indicator on the right side of the control panel go
off. When this is done, machine power is completely off. Use this switch only when necessary.
• This machine automatically enters Energy Saver mode or turns itself off if you do not use it for a while.
To specify the time that the machine waits before it enters Energy Saver mode and/or turns itself off,
configure the Energy Saver Timer and/or Auto Off Timer setting, respectively. See "System Settings",
Network and System Settings Guide

Turning On the Main Power

This section explains how to turn on the main power.
• Do not turn off the main power switch immediately after turning it on. Doing so may result in damage
to the hard disk or memory, leading to malfunctions.
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the front left cover, and turn on the main power switch.
The main power indicator goes on.
80
.