Handling The Main Machine - Toshiba E-studio 1105 Operating Instructions Manual

• When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the
prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
• To disconnect the power cord, pull it out by plug. Do not drag the cord itself. Doing so may result
in damage to the cord, leading to fire or electric shock.
• For safety reason, unplug the power cord from the wall outlet if the machine will not be used for
an extended period of time such as holidays.
• Before moving the machine, be sure to disconnect all external connections, especially the power
cord from the wall outlet. Damaged power cords are a fire and electric shock hazard.

Handling the main machine

This section explains safety precautions about handling the main machine.
• Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the
following occurs:
• You spill something into the machine.
• You suspect that your machine needs service or repair.
• The external housing of your machine has been damaged.
• Do not turn the earth leakage breaker from the off to the on position. Otherwise it might lead to
an electric shock, fire or smoke, or cause the breakers to trip.
• Protect the machine from dampness or wet weather, such as rain and snow.
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, you should take care that the power cord will not be damaged under the machine.
23