Toshiba E-studio 1105 Operating Instructions Manual page 106

3. Adding Paper
2. Remove paper if loaded.
3. Release the lock on the side fences.
3
4. While pressing down the release lever, slide the side fences until they are aligned with the
paper size you want to load.
Make sure there are no gaps between the paper and side fences.
5. Slide the end fence until it is aligned with the size of paper to you want to load.
Make sure there are no gaps between the paper and end fence.
6. Square the paper and load it print side up.
Re-lock the side fences again.
104
BQX070S
BQX071S
BQX072S