7. Handling the Ring Binder, Perfect
Binder and Stacker
This section explains procedures for handling the Ring Binder, Perfect Binder, and Stacker.
Changing the Ring Binding Settings
This section explains how you can use User Tools to specify which binding and punch hole positions appear
for selection on the display panel.
Follow the procedure below to specify the items that appear on the display panel.
1.
Press the [User Tools] key.
2.
Press [Copier / Document Server Features].
3.
Press [Input / Output].
4.
Select the menu tab.
5.
Select the ring binding types you want to display, and then press [OK].
6.
Press [Exit].
The display returns to the User Tools screen.
7.
Press [Exit].
Exits settings and gets ready to copy.
Ring Binding Types That Can Be Specified
You can specify the following items.
Ring binding types on the initial display
Using [Ring Binding Type], you can specify which ring binding types have priority on the initial display.
The following ring binding types are available:
• Ring Binding: Left
• Ring Binding: Top
• Ring Binding: Right
• Punch Only: Left
• Punch Only: Top
• Punch Only: Right
7
149