7.
Carefully slide the paper tray fully in.
8.
Check the size on the display.
Changing the Paper Size in the Large Capacity Tray
This section describes how to change the paper size in the LCT.
• As for changing paper sizes of Tray 6, contact your service representative.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Do not stack paper over the limit mark.
• Check the paper edges are aligned with the left side.
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2.
Remove paper if loaded.
BQX073S
BQX053S
Changing the Paper Size
105
3