3. Adding Paper
1.
Set the end fence according to the paper size.
3
1. A4
1
2. 8
/
× 11
2
3. Tab Stock
2.
Fasten the end fence using the screw provided.
• When loading Tab Stock, shift the end fence for A4 , 8
end fence for Tab Stock.
Changing the Paper Size in the Wide Large Capacity Tray
This section describes how to change the paper size in the Wide LCT.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Do not stack paper over the limit mark.
• Check the paper edges are aligned with the left side.
108
BQX080S
BQX081S
1
/
× 11 to position 3 before setting the
2