Loading Paper Into The Wide Large Capacity Tray - Toshiba E-studio 1105 Operating Instructions Manual

3. Adding Paper
3
3. Carefully push the paper tray fully in.
• The tray can hold up to 1,000 sheets in Tray 4 and Tray 5, and 2,550 sheets in Tray 6.

Loading Paper into the Wide Large Capacity Tray

This section describes how to load paper into the Wide LCT.
• The Wide LCT is identified as Tray 4, Tray 5, and Tray 6.
• Various sizes of paper can be loaded in the Wide LCT by adjusting the positions of side fence and
end fence.
• Check the paper edges are aligned at the left side.
• Do not stack paper over the limit mark.
• When setting tab stock, always use the tab sheet holder.
• When loading the Wide LCT with paper that is 100 139.7 mm (4.0 5.5 inches) long, always use
the special side fence.
90
BQX054S
BAS177S