Loading Paper Into The A3/11 × 17 Tray Unit - Toshiba E-studio 1105 Operating Instructions Manual

• Each tray can hold up to 1,100 sheets of paper.
Loading Paper into the A3/11 × 17 Tray Unit
This section describes how to load paper into the A3/11 × 17 tray unit.
• To use the A3/11 × 17 tray unit, you must replace Tray 1.
• A3/11 × 17 tray unit uses only 11 × 17
Industrial Standard) , 8
• Make sure that the paper stack is flush to the right side fence.
• Do not stack paper over the limit mark.
1. Carefully pull out the paper tray until it stops.
2. Place the paper in the tray along the edge on the left.
Load the paper print side down.
3. Carefully push the paper tray fully in.
• The tray can hold up to 1,100 sheets.
paper. If you want to load A3 , A4
1 1
/ × 14 , or 8 / × 11
2 2
BQX049S
BQX050S
, contact your service representative.
Loading Paper
3
, B4 JIS (Japanese
87