Preparation 1 - Turning Power On; Turning On - Toshiba e-studio 2822AM User Manual

Preparation 1 - Turning Power ON

0.
 Turning on
Press the power switch to " " (on).
1
Starts warming up. When the warm-up has finished, the equipment is ready.
READY
1
100% A4
AUTO EXPOSURE
TEXT/PHOTO
If you press [START] during the warm-up, copying automatically starts after it has finished. When the job is
reserved, "COPYING" appears on the LCD screen to show you the current status.
This function cannot be accessed while "PLEASE WAIT" is being displayed.
The LCD screen below is shown if the equipment is managed under the department code
2
function.
DEPARTMENT CODE
_
:12
Key in a 5-digit department code, and then press [OK].
If the department code function is enabled, press [FUNCTION CLEAR] after any operation to prevent
unauthorized use of the equipment.
For the details of the department code, see the following page:
 P.183 "Department Management"
 Turning off
Press the power switch to " " (off).

Preparation 1 - Turning Power ON 17