Toshiba E-studio 1105 Operating Instructions Manual page 24

Handling power cords and power plugs
This section explains safety precautions about handling power cords and power plugs.
• Connect this machine only to a power source that matches the specifications shown in
"Specifications for the Main Unit" in this manual and do not use an extension cord.
• Use of this machine with extension cords and power sources other than those that match the
specifications shown constitutes an electric shock and fire hazard.
• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and electric
shock hazard.
• Power cords that are damaged, broken, modified, trapped under heavy objects, pulled hard, or
bent severely are electric shock and fire hazards.
• Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes
frayed or otherwise damaged.
• If the power cord is damaged (exposure of the core, disconnection, etc.), contact your service
representative to change a new one. Operating the machine with a damaged power cord may
cause an electric shock or fire.
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, you should take care that the power cord will not be damaged under the machine.
• It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric
shock.
• The supplied power cord is for use with this equipment only. Do not use with other appliances.
Doing so may result in fire, electric shock, or injury.
• The wall outlet shall be installed near the machine and shall be easily accessible.
22