Paper Handling Tab - Toshiba E-STUDIO 281C Printing Manual

6) Use Custom Margin
Check this to set the margin on the printed pages. When this is checked, click [Detail...] to
set the margins in the Custom Margin dialog box.
The margin range is between 5 mm and 100 mm. Less than 5 mm cannot be set for the
range.
Enable this function to add the margins if the application does not support the margin
function. When the application has the margin function, use the application's function
rather than this option.
This cannot specify the binding margin for Booklet printing.

Paper Handling Tab

The Paper Handling tab allows you to enable Front Cover printing, Back Cover printing, Insert-
ing Pages, and Interleaving Pages.
1) Destination
This selects the destination tray to which jobs will be output.
- Inner Tray — Select this to route the output to the inner tray.
- Tray 1 — Select this to route the output to the upper tray of the Finisher.
- Tray 2 — Select this to route the output to the lower tray of the Finisher.
"Tray 1" and "Tray 2" can be selected when the Hanging Finisher, Finisher, or Saddle
Stitch Finisher are installed and configured on the Configuration tab.
If you select "Rotated Sort Copies" at the "Copy Handling" drop down menu in the Setup
tab, only "Inner Tray" can be selected.
2) Use Front Cover
This sets front cover printing which allows you to insert or print a cover on a sheet fed from a
different Drawers or Bypass tray than the Paper Source option selected on the Basic tab.
To enable cover printing, check on the box and select the location from where a cover sheet
is to be fed and the print style to be used.
1
2
3
4
5
Setting Up Print Options 245