Checking The Switch; Checking A Switch Shown In The Manual - Yamaha YFM45FAR Service Manual

R Br/L R Br
OFF
ON
Br
R
Br/L
R

CHECKING THE SWITCH

CHECKING THE SWITCH
CHECKING THE SWITCH
Use a pocket tester to check the terminals for
continuity. If the continuity is faulty at any
point, replace the switch.
Pocket tester:
NOTE:
Set the pocket tester to "0" before starting
G
the test.
The pocket tester should be set to the "Ω × 1"
G
range when testing the switch for continuity.
Turn the switch on and off a few times when
G
checking it.
CHECKING A SWITCH SHOWN IN THE
MANUAL
The terminal connections for switches (main
switch, handlebar switch, engine stop switch,
light switch, etc.) are shown in a chart similar
to the one on the left.
This chart shows the switch positions in the
column and the switch lead colors in the top
row.
For each switch position, "
the terminals with continuity.
The example chart shows that:
There is continuity between red and brown/
blue, and between red and brown when the
switch is set to "ON".
9 - 2
ELEC
P/N. YU-03112, 90890-03112
– +
" indicates