Installing The Clutch - Yamaha YFM45FAR Service Manual

CLUTCH
2.Check:
Clutch shoe
G
Heat damage → Replace.
3.Measure:
Clutch shoe thickness
G
Out of specification → Replace.
Clutch shoe thickness:
1.5 mm (0.06 in)
Clutch shoe wear limit a:
1.0 mm (0.04 in)

INSTALLING THE CLUTCH

1.Install:
Collar
G
Clutch carrier assembly
G
Nut 1
New
G
NOTE:
Lubricate the nut with molybdenum disulfide
G
oil.
Use a clutch holding tool 2 to hold the clutch
G
carrier assembly.
Clutch holding tool:
P/N. YM-91042, 90890-04086
2.Lock the threads with a drift punch.
3.Install:
One-way clutch bearing
G
NOTE:
The one-way clutch bearing should be
installed in the clutch carrier assembly with the
arrow mark a facing toward the clutch
housing.
4 - 54
ENG
140 Nm (14.0 m • kg, 100 ft • lb)