Assembling The Front Brake Master Cylinder; Assembling The Rear Brake Master Cylinder - Yamaha YFM45FAR Service Manual

FRONT AND REAR BRAKES
EB702060
ASSEMBLING THE FRONT BRAKE
MASTER CYLINDER
WARNING
All internal brake components should be
G
cleaned and lubricated with new brake
fluid only before installation.
Whenever
G
disassembled, replace the piston seals
and dust seals.
EB702060
ASSEMBLING THE REAR BRAKE MASTER
CYLINDER
WARNING
All internal brake components should be
G
cleaned and lubricated with new brake
fluid only before installation.
Whenever
G
disassembled, replace the piston seals
and dust seals.
1.Install:
Brake master cylinder kit
G
Nut 1
G
Joint 2
G
NOTE:
Turn the adjusting bolt 3 until the clearance a
is within the specified limits when install the
joint 2.
2.Tighten:
Nut 1
G
8 - 18
CHAS
Recommended brake fluid:
DOT 4
a master
Recommended brake fluid:
DOT 4
a master
Clearance a:
4 ~ 6 mm (0.16 ~ 0.24 in)
cylinder is
cylinder is