Yamaha YFM45FAR Service Manual page 121

CHECKING THE TIRE
1.Measure:
Tire pressure (cold tire pressure)
G
Out of specification → Adjust.
NOTE:
The low-pressure tire gauge 1 is included
G
as standard equipment.
If dust or the like is stuck to this gauge, it will
G
not provide the correct readings. Therefore,
take two measurements of the tire's pressure
and use the second reading.
Cold tire
pressure
Standard (0.25 kg/cm
Minimum (0.22 kg/cm
Maximum (0.28 kg/cm
WARNING
Uneven or improper tire pressure may
adversely affect the handling of this
machine and may cause loss of control.
Maintain proper tire pressures.
G
Set tire pressures when the tires are cold.
G
Tire pressures must be equal in both front
G
tires and equal in both rear tires.
2.Check:
Tire surfaces
G
Wear/damage → Replace.
Tire wear limit a:
Front and rear: 3.0 mm (0.12 in)
WARNING
It is dangerous to ride with a worn-out tire.
When tire wear is out of specification,
replace the tire immediately.
3 - 52
CHK
ADJ
Front Rear
25 kPa 25 kPa
2
, (0.25 kg/cm
3.6 psi) 3.6 psi)
22 kPa 22 kPa
2
, (0.22 kg/cm
3.2 psi) 3.2 psi)
28 kPa 28 kPa
2
, (0.28 kg/cm
4.0 psi) 4.0 psi)
2
,
2
,
2
,