Removing The Universal Joint; Removing The Ring Gear - Yamaha YFM45FAR Service Manual

FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR

REMOVING THE UNIVERSAL JOINT

1.Remove:
Universal joint
G
*****************************************************
Removal steps:
G Remove the circlips 1.
G
Place the U-joint in a press.
G With a suitable diameter pipe 2 beneath the
yoke 3, press the bearing 4 into the pipe as
shown.
NOTE:
It may be necessary to lightly tap the yoke with
a punch.
G
Repeat the steps for the opposite bearing.
G
Remove the yoke.
NOTE:
it may be necessary to lightly tap the yoke with
a punch.
*****************************************************
2.Remove:
Universal joint yoke
G
Use a universal joint holder 1.
Universal joint holder:
P/N. YM-04062, 90890-04062

REMOVING THE RING GEAR

1.Remove:
Ring gear 1
G
NOTE:
The ring gear and the differential gear cover
should be
disassemble the differential gear assembly.
CAUTION:
The differential gears are assembled into a
proper unit at the factory by means of
specialized equipment. Do not attempt to
disassemble this unit. Disassembly will
result in the malfunction of the unit.
7 - 9
DRIV
fastened together. Do not