Installing The Valve And Valve Spring - Yamaha YFM45FAR Service Manual

CAMSHAFT, ROCKER ARMS AND VALVES
12.Measure:
Spring tilt a
G
Out of specification → Replace.
Spring tilt limit:
Inner:
2.5°/1.6 mm (0.06 in)
Outer:
2.5°/1.6 mm (0.06 in)
INSTALLING THE VALVE AND VALVE
SPRING
1.Apply:
Molybdenum disulfide oil
G
(onto the valve stem and valve stem seal)
2.Install:
Valve spring seats
G
Valve stem seals
G
Valves
G
Valve springs (inner and outer)
G
Valve spring retainers
G
NOTE:
Install the valve springs with the larger pitch a
facing upwards.
b Smaller pitch
3.Install:
Valve cotters
G
NOTE:
Install the valve cotters while compressing the
valve spring with the valve spring compressor
1.
Valve spring compressor:
P/N. YM-04019, 90890-04019
4.To secure the valve cotters onto the valve
stem, lightly tap the valve tip with a piece of
wood.
CAUTION:
Hitting the valve tip with excessive force
could damage the valve.
4 - 25
ENG
New