È
É
CRANKCASE
REMOVING THE OIL PUMP DRIVE GEAR
1.Straighten:
Lock washer tab
G
2.Remove:
Oil pump drive gear nut
G
*****************************************************
Removal steps:
G
Temporary install the clutch carrier assembly
1.
G
Hold the clutch carrier assembly with a clutch
holding tool 2 and loosen the oil pump drive
gear nut.
Clutch holding tool:
P/N. YM-91042, 90890-04086
G
Remove the clutch carrier assembly.
*****************************************************
SEPARATING THE CRANKCASE
1.Separate:
Left crankcase
G
*****************************************************
Separation steps:
G
Remove the crankcase bolts.
NOTE:
Loosen each bolt 1/4 of a turn at a time and
G
after all the bolts are loosened, remove
them.
Loosen the bolts in stages, using a
G
crisscross pattern.
È Left crankcase
É Right crankcase
4 - 60
ENG