Assembling The Front Brake Master Cylinder; Assembling The Rear Brake Master Cylinder - Yamaha 5KM2-AE1 Service Manual

FRONT AND REAR BRAKES
EB702060
ASSEMBLING THE FRONT BRAKE
MASTER CYLINDER
WARNING
All internal brake components should be
G
cleaned and lubricated with new brake
fluid only before installation.
Whenever a master cylinder is disassem-
G
bled, replace the piston seals and dust
seals.
EB702060
ASSEMBLING THE REAR BRAKE MASTER
CYLINDER
WARNING
All internal brake components should be
G
cleaned and lubricated with new brake
fluid only before installation.
Whenever a master cylinder is disassem-
G
bled, replace the piston seals and dust
seals.
1.Install:
Brake master cylinder kit
G
Nut 1
G
Joint 2
G
NOTE:
Turn the adjusting bolt 3 until the clearance a
is within the specified limits when install the
joint 2.
2.Tighten:
Nut 1
G
8 - 22
CHAS
Recommended brake fluid:
DOT 4
Recommended brake fluid:
DOT 4
Clearance a:
5 ~ 6 mm (0.20 ~ 0.24 in)