Uniden DECT1015 Owner's Manual page 8

You can change these settings separately for each handset.
Handset Setup Menu
Turn on T-coil mode to reduce noise on some hearing
T-coil
aids (for more details, see page 16).
Choose this handset's ring tone. As you highlight each
Ringer Tones ring tone, the phone plays a sample. When you hear
the tone you want, press
Have this handset answer a call when you pick it up
AutoTalk
from the cradle (without pressing any buttons).
Any Key Have this handset answer a call when you press any
Answer key on the 12-key dialpad.
Banner Change the name used on the handset's display.
Key Touch Tone Have the keypad sound a tone when you press a key.
Use this menu to set the clock manually. (If you have Caller ID, the
Day & Time Menu
phone sets the day and time from the CID data.) Select the day of week,
then use the number keypad to enter the hour and minutes in HHMM
format (e.g., enter 0345 for 3:45). Then, select AM or PM.
The settings on this menu affect all handsets. Only one handset at a
Global Setup Menu
time can change these menu options.
Insert 0
VMWI Reset
Use the 12-key dial pad when you want to enter text into your phone
Entering Text on Your Phone
(a name in the phonebook, the handset banner, etc.).
The phone defaults to a capital letter for the first letter and any
letter after a space; otherwise, it uses small letters.

8
Adds "0" or "00" to the beginning of the number
received from Caller ID. The default setting is ON for
New Zealand and OFF for Australia.
Reset your Visual Message Waiting Indicator to
bring it back in sync with your voice mail service.
.
MEnu/sElECT