Page 1
AC adapter (AAD-600S(M)) Telephone cord If any items are missing or damaged, contact your place of purchase immediately. Never use damaged products! Need Help? Get answers at our website: www.uniden.com.au for Australian model or www.uniden.co.nz for New Zealand model. ...
What’s in the manual? Important Information ....15 Getting Started ......3 Solving Problems ...... 15 Installing Your Phone ....3 AC Adapter and Battery Getting to Know Your Phone ..4 Information ......18 Using the Menu ......7 Mounting the Base unit on Using Your Phone ......
Replace the battery cover and slide it into place. Connect the AC adapters to the jack on the base (and on the charger for DECT1015+1). Set the plug(s) into the notch(es). DC IN 9V Plug the other end of the adapters into standard 240V AC outlets.
Pick up the handset from the cradle and press . You should Test the Connection hear a dial tone, and the display should say Talk. Talk If you don't hear a dial tone or the display says try checking the connection between the base and the phone Check Tel Line, jack.
Page 5
Parts of the Base FIND CHARGING CONTACTS Handset keys/LEDs and how they work Key (icon) What it does In standby: start an intercom call. During a call: put the call on hold and start a call HOld/ClEaR/ transfer to another handset. InTERCOM While entering text: delete one character, or press and hold to delete all the characters.
Page 6
Key (icon) What it does In standby: open the menu. MEnu/sElECT In the menu or any list: select the highlighted item. In standby: increase the ringer volume. During a call: increase the audio volume. up ( In any menu or list: move the cursor up one line. In standby: decrease the ringer volume.
This table shows possible status icons and what they mean. Since the Reading the Display icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time. icon What it means of time (1 or 4 minutes) callers have to The ringer is turned off and will not ring for new calls.
Page 8
You can change these settings separately for each handset. Handset Setup Menu Turn on T-coil mode to reduce noise on some hearing T-coil aids (for more details, see page 16). Choose this handset's ring tone. As you highlight each Ringer Tones ring tone, the phone plays a sample.
To switch to all capital letters, press . The phone defaults to all capital letters first (e. g. ABCabc2) until you enter a blank space or press again. (Any time you want to change case, just press If two letters in a row use the same number key, enter the first letter and wait a few seconds (or press );...
You can set the earpiece volume on each handset. Anytime you are Changing the Volume listening to the earpiece, press to increase the volume and decrease it. dOwn You can also set the ringer volume separately: when the phone is in standby, press to increase the ringer volume and to decrease.
Delete Entry Erase the number from the list. Add the number to the phonebook. The handset prompts Store Into Pb you to edit the name and number. (CID list only) Erase all numbers from the list. Delete All Call Waiting, a service available from your telephone provider, lets you Using Call Waiting receive calls while you are on another call.
Open the phonebook with the phone in standby, then press Phonebook Menu Options to open the phonebook menu. Choose one of these options: MEnu/ sElECT Add an entry to your phonebook. The phone prompts you Create New to enter a name and number. If you need the phone to pause before sending the next set of Delete All Erase all the entries in the phonebook.
If you change your mind, use MEnu/sElECT to close the phonebook. pHOnEbOOk/lEfT Multihandset Features (DECT1015+1 Only) When an outside call comes in, two handsets can join in a conference Conference Calling call with the outside caller.
To... Follow these steps: Press HOld/ClEaR/InTERCOM make an intercom Select the handset you want to talk with, or page All to page all handsets at the same time. cancel a page Press answer an intercom Press HOld/ClEaR/InTERCOM Talk/flasH page end an intercom call Press .
IMPORTANT INFORMATION If you have any trouble with your phone, try these simple steps first. If Solving Problems you need help, visit our website listed on the front cover. if… Try… Checking the telephone cord connection. No handsets can make Disconnecting the base AC adapter.
Page 16
Interference is the most Noise or Static on the Line • If you have a hearing aid equipped common cause of noise or Do you use a T-Coil hearing aid? with a telecoil (T-coil) feature, the static on a cordless phone. interaction between the hearing aid Here are some common &...
Sometimes, broadband Internet services that use the telephone line Installing a Line Filter or DSL Filter can interfere with phones. One of these services−DSL−often causes static on telephones. A DSL filter or telephone line filter usually solves this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store.
• Use only the supplied AC adapters. Be sure to use the proper adapter for the AC Adapter and Battery Information base & any chargers. • Do not place the power cord where it creates a trip Base/Charger hazard or where it could AAD-041S(M) / become chafed and create a Part number...
You can mount your base directly to the wall using the horizontally Mounting the Base unit on a Wall aligned mounting slots at the back of the base unit. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
Page 20
An optional wall mount bracket can be purchased from our online Optional Wall Mount Bracket store to mount the base to a standard wall plate that has vertically aligned mount holes. Visit our website; www.uniden.com.au for Australia or www.uniden.co.nz for New Zealand.
Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warrantor: ELEMENT OF WARRANTY: Uniden warrants to the original retail owner Warranty is only valid in the original country of purchase. for the duration of this warranty, its DECT1015/DECT1015+1 (herein after referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
Page 23
Product should be shipped or delivered, freight pre-paid, with evidence of original purchase (e.g. a copy of the sales docket), to the warrantor at: UNIDEN AUSTRALIA PTY UNIDEN NEW ZEALAND Service Division...
Need help?
Do you have a question about the DECT1015 and is the answer not in the manual?
Questions and answers