Step By Step Playback; Marker Setup - FUNAI WL6D-M102 Owner's Manual

Step by Step Playback

Video
DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
1
During playback, press [PAUSE F].
2
Press [SKIP H \ G] repeatedly.
Each time you press [SKIP G], playback will go forward
one frame (or step) at a time with the sound muted.
To go backward one frame (or step), press [SKIP H].
Press and hold [SKIP G] to continue going forward.
To continue going backward, press and hold [SKIP H].
3
Press [PLAY B] to resume playback.
Note
• Only step by step forward is available when playing back
media with DivX ® files.
Slow Forward / Slow Reverse Playback
Video
DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
1
During playback, press [PAUSE F], then press
[FWD D] or [REV E].
Each time you press [FWD D] or [REV E], the
approximate speed changes as follows.
(The sound will remain muted.)
FWD FWD FWD
1 /4x 1 /8x 1 / 1 6x
Pause
REV REV REV
To return to normal playback, press [PLAY B].
Note
• Forward / reverse speeds are indicated with icons as follows.
Forward (Approx. Speed):
1/16x:
1/8x:
1/3x:
Reverse (Approx. Speed):
1/16x:
1/8x:
1/4x:
• For some DivX ® files, Slow forward may not function.
• Only slow forward is available when playing back media with
DivX ® files.
Zoom
Video
DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
1
During playback, press [DISPLAY] to bring up
the display menu.
2
icon using [0 \ 1] to display the
Select the
selection menu.
T 1/ 5 C 1/ 5
× 1.2
× 1.5
× 2.0
Four options are available, "x1.0", "x1.2", "x1.5" and
"x2.0". These are displayed excluding the current zoom
rate.
VR
DVD-R DivX DivX DivX ®
®
DVD-R DVD-R
VR
DVD-R DivX DivX DivX ®
®
DVD-R DVD-R
FWD FWD FWD
1 / 1 6x 1 /8x 1 /3x
REV REV REV
VR
DVD-R JPEG JPEG DivX JPEG DivX DivX
DVD-R DVD-R
0:01:00 / 1:23:45
DVD Video
3
Select the desired zoom factor to zoom using
[K \ L], then press [ENTER].
The zoom area is displayed.
4
Select the desired zoom position using
[K \ L \ 0 \ 1], then press [ENTER].
Zoom playback will start.
Note
• To cancel the zoom function, select "x1.0" using [K \ L],
then press [ENTER].
• If selecting a smaller factor than that currently selected, the
zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG files.

Marker Setup

Video
DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-RW
You can assign a specific point on a disc to return later.
1
During playback, press [DISPLAY] to bring up
the display menu.
If the display menu is already shown, skip to step
2
icon using [0 \ 1] to display the
Select the
marker list.
e.g.) DVD-video
T 1/ 5 C 1/ 5
1
2
3
4
5
6
3 Select the desired marker number using [K \ L].
When the disc reaches the desired point, press
[ENTER].
The title (track) number and the time are displayed.
4
To return to the marker, select the desired
marker number using [K \ L], then press
[ENTER].
Note
• To clear a marker, select the marker number you want to
clear, then press [CLEAR].
• You can mark up to 6 points.
• All markers are erased when you perform the following
operations.
- Opening the disc tray
®
®
- Turning off the power
- Making additional recording on the disc (DVD only)
- Editing any title (DVD only)
- Changing the mode between Original and Playlist. (VR
mode DVD-RW disc only)
VR
DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R
0:01:00 / 1:23:45
DVD Video
---
---
---
---
---
---
CD CD CD
2
.
41
EN