Related Manuals for FUNAI ZV427FX4
Summary of Contents for FUNAI ZV427FX4
- Page 1 Funai ZV427FX4 DVD/VCR Dubbing Unit Quick Start Guide...
- Page 2 ATTENTION! You must purchase DVD-R or DVD-RW discs to use with this unit. DVD+R and DVD+RW discs SUPPORTED.
- Page 3 1. Plugging in the Recorder to your TV To begin, locate your TV’s “Line In” jack. First you need to determine what kind of connection your TV has. The Funai ZV427FX4 has both HDMI and composite connections. HDMI cable and port Composite cables and ports Now, connect the cable to your ‘Composite In’...
- Page 4 Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording Now you must first find the correct input of your TV/receiver. If you have an HDMI cable connected from the unit to your TV, the [INPUT] or [SOURCE] button will allow you to select the HDMI input that you need.
- Page 5 Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording 2. Turn on the recorder and load media To start the Funai ZV427FX4, either press the unit’s [POWER] button (pictured below left) or, while pointing the remote at the unit, press the remote’s [STANDBY-ON] button (pictured be- low right).
- Page 6 Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording 3. Choose your recording mode and begin Once you have both the DVD and VHS media inserted, pick up the unit’s remote control and press [SETUP]. In the setup menu, you’ll see four options. Select [General Setting].
- Page 7 Then press [SETUP] to exit. Now press [DVD] on the remote. At this point, you should see the indicator light on the front of the Funai Unit switch from VCR mode to DVD mode, shown below. NOTE: If you don’t see the video mode switch to DVD (above), press [DVD] until you do.
- Page 8 Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording 5(A): Recording from VHS to DVD Press [VCR], then press PLAY [ ] to find the point where you want to begin recording. Press PAUSE [ ] when you come to a good starting point PLAY Button for recording.
- Page 9 Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording 6(A): Finalizing Your Recorded Disc To begin finalizing your disc, press [SETUP], then navigate down to the [DVD MENU] listing and se- lect it. Use the arrows to select [Finalize] then press [OK].
- Page 10 Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording 4(B): Recording from DVD to VHS To begin the process of copying your DVD to a VHS tape, first you must select the correct dub- bing mode from the list. Select [DVD -> VCR].