Protecting Titles; Dividing A Title - FUNAI WL6D-M102 Owner's Manual

Dvd / video cassette recorder
Table of Contents

Advertisement

4
Select "Add" or "Delete" accordingly using
[K \ L], then press [ENTER].
You cannot delete the first chapter of a title.
5
Select "Yes" using [K \ L], then press [ENTER].
Adding a chapter mark:
If you select "Add" at step
created at the point you specified.
Deleting a chapter mark:
If you select "Delete" at step
selected is deleted.
6
Press [RETURN] repeatedly to exit.
For DVD, the data will be written onto the disc
momentarily.
This operation may take awhile to be completed.
Note
• Maximum numbers of chapter for each media:
VR mode DVD : 999 chapters per entire Playlist and
Original
Besides the mentioned above, the number of chapters
may be different according to the recording time.
• Only with regard to DVD editing, you may not be able to add
chapter marks depending on the duration of the title or the
number of chapters.
• Only with regard to DVD editing, remaining time of the disc
may decrease when adding chapter marks or increase when
clearing chapter marks depending on the recording time or
edited contents.
Adding or Deleting Chapter Marks at
once for Video Mode DVD-RW disc
Video
DVD-RW
DVD-RW
DVD-RW
For titles in video mode DVD-RW disc, you can set or edit
chapter at every selected time interval at once. You can also
clear all the chapter marks at once.
You can only specify the interval of chapter marks that last for
more than 5 minutes.
Press [DVD] first.
1
Follow the steps 1 to 3 in "Editing Title Name"
on page 49.
2
Select "Chapter Mark" using [K \ L], then press
[ENTER].
3
Select the desired interval using [K \ L], then
press [ENTER].
4
Select "Yes" using [K \ L], then press [ENTER].
Chapter marks are added.
If you select "OFF" at step
erased.
5
Press [RETURN] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
50
EN
4
, a new chapter mark is
4
, the chapter mark you
3
, all the chapter marks are
Note
• You cannot select the chapter mark the title of which is less
than 5 minutes.
• You cannot select a chapter mark interval that exceeds the
length of a title.
• The length of chapters may slightly deviate from the one
3
specified at the step
.
• A chapter mark may be delayed depending on the recording
content.
• Maximum number of chapter for video mode DVD is 99
chapters per disc and title.

Protecting Titles

VR
DVD-RW
DVD-RW
DVD-RW
Original
To prevent the accidental editing or erasing of the titles, you
can protect them in the Original menu.
Press [DVD] first.
1
Follow the steps 1 to 3 in "Editing Title Name"
on page 49.
2
Select "Protect" using [K \ L], then press
[ENTER].
3
Press [ENTER] again.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
• If the title is already protected, "ON A OFF" will appear
instead. Press [ENTER], to release the title from
protection.
• The protected title will be marked with
4
Press [RETURN] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
To protect a whole disc:
Select "Disc Protect OFF A ON" from "DVD Menu", then
select "Yes". Refer to "Setting a Disc to Protect" on
page 33.

Dividing a Title

VR
DVD-RW
DVD-RW
DVD-RW
Playlist
You can divide a title into two new titles.
Press [DVD] first.
1
Follow steps 1 to 3 in "Editing Title Name" on
page 49.
2
Use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] to find where you
want to divide the title.
3
Select "Title Dividing" using [K \ L], then press
[ENTER].
icon.

Advertisement

Table of Contents
loading

Table of Contents