Functional Overview; Front Panel; Rear Panel - FUNAI WL6D-M102 Owner's Manual

Functional Overview

Front Panel

1
21* 3
20
You can also turn on the unit by pressing these buttons.
You can turn on the unit by pressing these buttons only when a videotape is in this unit.
Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the
AC power cord.)
1 STANDBY-ON indicator
2 Cassette compartment
3 OPEN\CLOSE A button*
4 VCR/DVD indicators
5 Disc tray
6 DV-IN jack (AV3)
7 USB input jack
8 RECORD I button (DVD)
9 PLAY B button* 1 (DVD)
10 STOP C button (DVD)
11 SELECT button
Button names described in the Owner's Manual
The instructions in this manual are described mainly with the operations using the remote control. Some operations can be
carried out using the buttons on the front panel.

Rear Panel

1
1 Mains cable
2 HDMI OUT jack
3 DIGITAL AUDIO OUT (COAXIAL) jack
4 AUDIO OUT (L\R) jacks
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
• After turning off the unit, leave the mains cable plugged for about one minute. Otherwise it may cause data loss or the unit may
not work properly.
• This unit has no tuner system so it cannot receive TV broadcasts without an external tuner or
such devices.
10
EN
2
19* 2 17* 2 16 15
18* 2
1 (DVD)
2
3* 1 4
14
13 12
11
12 DUBBING button
13 AUX K \ L buttons
14 Display ("Off" in standby)
15 Infrared sensor window
16 RECORD I button (VCR)
17 PLAY B button*
18 F.FWD D button*
19 REW E button*
20 STOP\EJECT C A button (VCR)
21 STANDBY-ON Q button*
3 4 5 6
5 COMPONENT VIDEO OUT jacks
6 AV2 (DECODER) socket
7 AV1 (TV) socket
5
5V 500mA
10 8 7 6
9* 1
2
(VCR)
2 (VCR)
2 (VCR)
3
7