FUNAI WL6D-M102 Owner's Manual page 28

The error numbers indicate:
E1–E22, E37–E39 Recording error
E23–E24 Unrecordable disc
E25/E51 • Copy prohibited programme
• Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28 Copy prohibited programme
E29 Disc protected
E30 Disc full
E31 Already recorded 99 titles (video mode)
E32 Already recorded 99 titles (VR mode)
E33 Already recorded 999 chapters
E34 No space for Control Information
E35 PCA (Power Calibration Area) full
E36 Already finalised video format disc
E40 • There are some unrecorded parts due
to the overlapped timer programmes.
• Recording did not start at the start
time.
E41 Power failure
E42 No disc
E45 Copy prohibited programme
• Timer programme with an error number will be cleared once
the entry screen for the programme is displayed.
Notes for the Timer Recording
• If there is a power failure or the unit is unplugged for more
than 30 seconds, the clock setting and all timer settings will
be lost.
• If a disc is not inserted or if a inserted disc is not recordable
(finalised DVD-RW/-R, a fully recorded disc, etc.), the DVD
on the front panel display will flash and the timer recording
will not occur. Insert a recordable disc.
• If there is no tape or a tape with a record tab is not in the
cassette compartment, the VCR on the front panel display
will flash and the timer recording cannot be performed.
Please insert a recordable tape.
• After all timer recordings have completed, if you want to play
back or eject the recorded disc, press [TIMER SET], and
then press [PLAY B] or [OPEN\CLOSE EJECT A].
• The timer recording cannot be performed in DVD and VCR
at the same time. If you set two programmings with the same
channel and time both in DVD and VCR, the programming
that has priority will be recorded.
• You cannot make any DVD operation during DVD timer
recording.
• You cannot make any VCR operation during VCR timer
recording.
• Timer recording whose recording time exceeds 12 hours
cannot be made.
• When 2 or more programmes are overlapped, "Timer
programme overlapped" appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme refer to "Checking, Cancelling or Correcting the
Timer Programming Information" on page 27.
• If the Start time is earlier and the End time is later than the
current time, the recording will start immediately after you
press [TIMER SET].
• If a videotape ends during the timer recording, the unit will
automatically stop, eject the videotape, and turn itself off. To
continue recording, insert a recordable tape.
28
EN
Priority of overlapped settings
The unit records programmes according to priority if the timer
programmes overlap.
If the starting time is same:
• The timer programming set first (PROG. 1) has priority.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
The first 2 minutes (at the longest) will be cut off.
When the starting time and the ending time for each
programmes are different:
• A programme that has earlier start time has priority.
PROG. 1
PROG. 2
PROG. 3
Actual
PROG. 1
recording
The first 2 minutes (at the longest) will be cut off.
If the recording time is partially overlapped:
• The timer programming with the earlier start time (PROG. 2)
has priority. PROG. 1 will start after PROG. 2 recording is
complete.
PROG. 1
PROG. 2
Actual
PROG. 2
recording
The first 2 minutes (at the longest) will be cut off.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not recorded.
PROG. 1
PROG. 2
Actual
PROG. 2
recording
Note for DVD recording
• If the recording time of two programmes are overlapped, or
the End time of a programme and the Start time of another is
same, the first 2 minutes (at the longest) of the subsequent
programme will be cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• If PROG. 1 is a DVD recorded programme, the beginning of
the PROG. 2 may be cut off.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
* If the cut off time exceeds 3 minutes, the error number "E40"
will appear in "Timer Programming" list.
PROG. 2
recording will start
after PROG. 1
recording is
completed.
PROG. 2
PRO
PROG. 3
G. 2
PROG. 1
PROG. 2
The first 2 minutes (at the
longest) will be cut off.*